4-30 User's Reference Guide
The following is a quick guide to configuring TCP/IP for MacOS computers. Configuring TCP/IP in a Macintosh
computer requires the following:
You must have either Open Transport or Classic Networking (MacTCP) installed.
You must have built-in Ethernet or a third-party Ethernet card and its associated drivers installed in your
Macintosh.
If you are manually configuring for a fixed or static IP address,
perform the following:
1.
Go to the Apple menu. Select Control Panels and then
TCP/IP or MacTCP.
2.
With the TCP/IP window open, go to the Edit menu and
select User Mode. Choose Advanced and click OK.
Or, in the MacTCP window, select Ethernet and click the
More button.
3.
In the TCP/IP window or in the MacTCP/More window, select or type information into the fields as shown in
the following table.
Connect via:
Configure:
IP Address:
Subnet mask:
Router or Gateway address:
Name server address:
Option:
Ethernet
Manually
192.168.1.2
255.255.255.0, or for 12-user models
255.255.255.240
192.168.1.1
Enter the primary and secondary name server
addresses given to you by your ISP
Select/Type: