Table of Contents
Advertisement
The System Information screen gives a summary view of the general system level values in the Netopia
D-Series DSL DSU.
From the Statistics & Logs menu select System Information. The System Information screen appears.
Serial Number
Firmware Version
Processor Speed (MHz)
Flash ROM Capacity (MBytes)
DRAM Capacity (MBytes)
Ethernet
Auxiliary Serial Port
WAN 1 Interface
WAN 2 Interface
AppleTalk Feature Set
Analog Dial-In Kit
IMUX Support
Note: The information display varies by model, firmware version, feature set, and so on.
You can tell at a glance your particular system configuration.
The Netopia D-Series includes a Simple Network Management Protocol (SNMP) agent, allowing monitoring and
configuration by a standard SNMP manager.
The Netopia D-Series supports the following management information base (MIB) documents:
MIB II (RFC 1213)
Interface MIB (RFC 1229)
Ethernet MIB (RFC 1643)
Netopia MIB
These MIBs are on the CustomerCare CD included with the Netopia D-Series. Load these MIBs into your SNMP
management software in the order they are listed here. Follow the instructions included with your SNMP
manager on how to load MIBs.
System Information
70-03-48 (7340872)
4.6
33
1
4
8 Port 10Base-T
Switched Async
CMN SDSL, fw v1.40.13
CMN SDSL, fw v1.40.13
Not Installed
Installed
Installed
Monitoring Tools 7-57
Advertisement
Table of Contents
