Netopia D3232 User Reference Manual page 18

2-18 User's Reference Guide
Port
8-port Ethernet hub
The figure below represents the Netopia D-Series status light (LED) panel.
Netopia D-Series LED front panel
1
WAN 1
The following table summarizes the meaning of the various LED states and colors:
When this happens...
The corresponding line passes supervisory traffic between
the Digital Subscriber Line Access Multiplexer (DSLAM) and
the Netopia D-Series
The WAN interface is operational
The line is unavailable
The WAN on Channel 1 has carrier
Data is transmitted or received on the WAN on Channel 1
The WAN on Channel 2 has carrier
Eight 10Base-T Ethernet jacks. You will use one of these to configure the
Netopia D-Series. For a new installation, use the Ethernet connection.
Alternatively, you can use the console connection to run console-based
management using a direct serial connection. You can either connect your
computer directly to any of the Ethernet ports on the Netopia D-Series, or
connect both your computer and the Netopia D-Series to an existing Ethernet
hub on your LAN.
2 3 4 5 6 7 8 9 10 11
WAN 2
Description
12 13 14 15 16171819 20 21
Link/Receive
Ethernet
the LEDs...
2 or 8 flashes yellow.
3 or 9 is green.
3 or 9 flashes red.
4 or 10 is green.
4 or 10 flashes yellow.
5 or 11 is green. (D3232 only)