8-74 User's Reference Guide
This is an example of the Netopia Filter set screen:
Enabled:
Forward:
Type...
Source IP Address:
Source IP Address Mask:
Dest. IP Address:
Dest. IP Address Mask:
Protocol Type:
Source Port Compare...
Source Port ID:
Dest. Port Compare...
Dest. Port ID:
Established TCP Conns. Only:
Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.
In the source or destination IP address fields, the IP address that is entered must be the network address of
the subnet. A host address can be entered, but the applied subnet mask must be 32 bits (255.255.255.255).
Change Input Filter 1
Incoming
Packet Filter
Netopia
Yes
No
IP
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
TCP
No Compare
0
Equal
2000
No
Internet
DATA
IP: 200.1.1.??