Table of Contents
Advertisement
5-38 User's Reference Guide
Alternatively, you can have a direct serial console cable connection using the provided console cable for
your platform (PC or Macintosh) and the Console port on the back of the Netopia D-Series. For more
information on attaching the console cable, see
page
5-36.
Telnet software installed on the computer you will use to configure the Netopia D-Series
If you are configuring your Netopia D-Series using a Telnet session, your computer must be running a Telnet
software program.
If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet
from the Start menu.
If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the CustomerCare
CD. You install NCSA Telnet by simply dragging the application from the CD to your hard disk.
Use your keyboard to navigate the Netopia D-Series's configuration screens, enter and edit information, and
make choices. The following table lists the keys to use to navigate through the console screens.
Move through selectable items in a screen or pop-up menu
To set a change to a selected item or open a pop-up menu of
options for a selected item like entering an upgrade key
Change a toggle value (Yes/No, On/Off)
Restore an entry or toggle value to its previous value
Move one item up
Move one item down
Display a dump of the device event log
Display a dump of the WAN event log
Refresh the screen
Go to topmost selectable item
Go to bottom right selectable item
"Connecting a console cable to your Netopia D-Series" on
To...
Use These Keys...
Up, Down, Left, and
Right Arrow
Return or Enter
Tab
Esc
Up arrow or Control + k
Down arrow or Control + O
Control + e
Control + f
Control + L
<
>
Advertisement
Table of Contents
