Netopia D3232 User Reference Manual page 53

R: The letter "R" means the LED is red.
G: The letter "G" means the LED is green.
Y: The letter "Y" means the LED is yellow.
The section "Netopia D-Series DSL DSU status lights" on page 2-18
each LED.
Main
Menu
When you are troubleshooting your Netopia D-Series, the Statistics & Logs screens provide insight into the
recent event activities of the Netopia D-Series.
From the Main Menu go to Statistics & Logs and select one of the options described in the sections below.
To go to the General Statistics screen, select General Statistics and press Return. The General Statistics
screen appears.
Physical I/F----Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err
Ethernet Hub
Aux Sync
IDSL 1
Network----------Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err
IP
The General Statistics screen displays information about data traffic on the Netopia D-Series's data ports. This
information is useful for monitoring and troubleshooting your LAN. Note that the counters roll over at their
maximum field width, that is, they restart again at 0.
Statistics & Logs
General Statistics
123456789 123456789
123456789 123456789
123456789 123456789
123456789 123456789
describes the meanings of the colors for
General Statistics
12345678 12345678
12345678 12345678
12345678 12345678
12345678 12345678
Monitoring Tools 7-53
12345678 12345678
12345678 12345678
12345678 12345678
12345678 12345678