Status Lights - Netopia D3232 User Reference Manual

7-52 User's Reference Guide
Default IP Gateway:
Domain Name Server:
Domain Name: None Provided
----------------MAC Address--------IP Address-------IPX Address---------------
Ethernet Hub:
DSL Bond:
--DLCIs In Use--Bytes Rx----Bytes Tx---Frames Rx---Frames Tx---FECNs+BECNs----
0
PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
LNK RDY CH1 CH2
G -
Current Date: The current date; this can be set with the Date and Time utility (see
page 6-43).
Default IP Gateway: The Netopia D-Series's default gateway, which must be manually configured. If you are
using the Netopia D-Series's defaults this value will be 0.0.0.0. If you have assigned an IP address as your
default gateway, it is shown here.
CPU Load: Percentage of the system's resources being used by all current transmissions.
Unused Memory: The total remaining system memory available for use.
IP Address: The Netopia D-Series's IP address, entered in the IP Setup screen.
MAC Address: The Netopia D-Series's hardware address, for each MAC layer interface.
This section shows the current real-time status of the Netopia D-Series's status lights (LEDs). It is useful for
remotely monitoring the Netopia D-Series's status. The Quick View screen's arrangement of LEDs corresponds
to the physical arrangement of LEDs on the Netopia D-Series.
-PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
LNK RDY CH1 Ch2
G - G
Each LED representation can report one of four states:
–: A dash means the LED is off.
0.0.0.0
0.0.0.0
00-00-c5-70-03-48
00-00-c5-70-03-4a
Current Frame Relay Status
0
LNK LNK
R - - Y -
LNK LNK
- - Y -
Quick View
CPU Load: 10%
WAN Interface Group -- ISDN/IDSL
192.168.1.1
0.0.0.0
0 0
LED Status
LNK RDY CH1 CH2 DATA | '-'= Off 'G'= Green
- R - -
LNK RDY CH1 CH2 DATA | '-'= Off 'G'= Green
- - - - -
11/5/1999 12:42:24 PM
Unused Memory: 228 KB
0
- | 'R'= Red 'Y'= Yellow
"Date and time" on
| 'R'= Red 'Y'= Yellow
0