Table of Contents
Advertisement
6-44 User's Reference Guide
You can change the default terminal communications parameters to suit your requirements.
To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.
Baud Rate...
Hardware Flow Control:
SET CONFIG NOW
Follow these steps to change a parameter's value:
1.
Select the parameter you want to change.
2.
Select a new value for the parameter. Return to step 1 if you want to configure another parameter.
3.
Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameters
unchanged and exit the Console Configuration screen.
These screens allow you to monitor and configure your network by means of a standard Simple Network
Management Protocol (SNMP) agent. Details are given in
These screens allow you to add users and define passwords on your network. Details are given in
page
8-61.
You can upgrade your Netopia D-Series by adding new feature sets through the Upgrade Feature Set utility.
See the release notes that came with your Netopia D-Series or feature set upgrade, or visit the Netopia Web
site at www.netopia.com for information on new feature sets, how to obtain them, and how to install them on
your Netopia D-Series.
Console Configuration
57600
No
CANCEL
"SNMP" on page
7-57.
"Security" on
Advertisement
Table of Contents
