Table of Contents
Advertisement
6-50 User's Reference Guide
The Clock Source may be either Network or Internal. If you select Network (the default), the Netopia
D-Series IDSL interface functions in customer premise equipment (CPE) mode. This mode is the normal
mode for communicating with an ISP. If you select Internal, the Netopia D-Series functions in central office
equipment (COE) mode, simulating a DSLAM. This allows for back-to-back short haul applications with
another Netopia IDSL device operating in CPE mode.
A Data Rate pop-up item is available only if the clock source is Internal. This item allows you to set the
data rate for the DSL link (and the attached CPE device).
A Bridge Mode Filter Set pop-up item allows you to select a filter set to make active on the IDSL or SDSL
link. See
"About filters and filter sets" on page 8-64
for more information.
You can deactivate any previously selected filter set by selecting Remove Filter Set and pressing Return.
A Data Link Encapsulation pop-up item allows you to select an ecapsulation type for the link.
Prioritize Delay-Sensitive Data may be either Yes or No. The default is No.
Advertisement
Table of Contents
