Step 6: Saving the Results
6-1 Press
.
6-2 Use the text editing screen to enter a name for the
results. See Figure Figure on page 2-3 for details on
editing text.
6-3 Press
when you are done.
This concludes the tutorial on testing twisted pair cabling.
For more information on testing twisted pair cabling, see
Chapter 3.
Tutorials on Setup and Test Procedures
Using the Auto Increment and Sequential Cable ID Features
Using the Auto Increment and
Sequential Cable ID Features
The auto increment and sequential ID features generate
cable IDs automatically. This frees you from having to enter
IDs manually after each test.
These features are useful when you test installations with
sequentially-numbered links.
When you use an ID from a list, the ID is marked with a "$".
The List feature lets you select IDs from a list
created with LinkWare software and downloaded
to the tester. See the LinkWare documentation for
details.
Using the Auto Increment Feature
The auto increment feature increments the last character in
the ID you enter.
For example, if you save a test with the ID "A0", the tester
increments the ID as follows:
A0, A1, A2...A9, A10, A11...A99, A100, A101...
Consecutive digits increment from right to left, but other
characters do not.
Note
2
2-9