Memory Operations; Saving Results - Fluke 744 User Manual

Memory Operations

Saving Results

As Found/As Left test results are automatically saved
at the end of each test routine. Any other time during
MEASURE, SOURCE, or MEASURE / SOURCE you
can press the softkey to save the data on the
Save
display for later review.
After you press , the calibrator saves the
Save
information on the display and shows a saved result
index number, the date and time, and the percentage
of memory available, as in the following display:
Documenting Process Calibrator
If you want to add information to the saved data, the
calibrator has a way for you to do so. If you press the
softkey, the display prompts you to enter
Continue
the instrument tag identifier (
number ( ), and operator name (
S/N
the following display:
Memory Operations
gj49s.eps
), instrument serial
Tag
), as shown in
ID
81