Table of Contents
Advertisement
Connector for the twisted pair interface adapters.
Cover for the module bay. Leave the cover in place.
Bail.
USB (
) and RS-232C (
reports to a PC and updating the tester's software. The
RS-232C port uses a custom DTX cable available from
Fluke Networks. See Chapter 9 for more information.
): Ports for uploading test
Headset jack for talk mode.
Connector for the ac adapter. The LED turns on when
the tester is connected to ac power.
Red: Battery is charging.
Green: Battery is charged.
Flashing red: Charge timeout. The battery failed to
reach full charge within 6 hours. See "If Something
Seems Wrong" on page 9-7.
1
Getting Acquainted
Basic Features
1-9
Advertisement
Table of Contents
