Table of Contents
Advertisement
1
10
9
8
7
The media type selected for testing.
Battery status icon.
Test Limit: The tester compares test results to the
selected limit to determine the PASS/FAIL result.
Cable Type: The type of cable to be tested.
2
3
4
5
6
X05.EPS
Figure 1-9. The Main Autotest Screen (for Twisted Pair Media)
Outlet Configuration: The wire mapping used for testing
twisted pair cabling.
Press
to check the memory status.
Press
to view the results of the previous test.
Store Plot Data
No: Plot data is not saved, which lets you save more results.
Saved results show worst margins and worst values for each
pair.
Standard: The tester displays and saves plot data for
frequency-based tests such as NEXT, return loss, and
attenuation. The tester saves data for the frequency range
required by the selected test limit.
Extended: The tester saves data beyond the frequency range
required by the selected test limit.
Folder: The folder where results will be saved.
Operator, Site: Operator: The person using the tester and the
job site name. These are stored with saved results.
1
Getting Acquainted
Basic Features
1-19
Advertisement
Table of Contents
