Table of Contents
Advertisement
69
5
OR
6
Coutures à
If you have removed the harness straps from the
l'extrémité
splitter plate, and the buckle tongues and chest clip
have been unthreaded from the harness straps, follow
the steps below to rethread them.
1
Adjust Headrest to
Highest Position
1
2
3
Undo Fasteners on Seat
1
Pad and Pull Headrest Pad
2
3
Off Bottom of Headrest
Unthread harness straps from
slots on side of headrest.
Loosen harness straps.
Pull chest clip, harness straps,
Coutures à
and buckle tongues out from
behind the headrest and seat
l'extrémité
pad.
Slide harness straps into slots in
headrest pad.
Attach seat pad fasteners.
Thread Buckle and Chest
Clip
Harness strap ends go through
sewn
the back of buckle tongues and
end
through the chest clip front to
back as shown.
2
1
2
3
3
4
Coutures à
l'extrémité
sewn
end
The harness system must be installed correctly. Do
not use a child restraint with damaged harness straps.
Thread Harness Straps into
Upper Shoulder Harness
Slots
If you will be using the lower
shoulder harness slots for
smaller children, see pages
Coutures à
15-18.
l'extrémité
From Back, Thread Harness
Straps OVER Metal Bar
Do not twist harness straps.
Attach 1st Harness Strap
Loops to Splitter Plate As
Shown
Sewn ends of the harness strap
Coutures à
loops must face towards you.
l'extrémité
Do not twist harness strap or
sewn
harness adjustment strap.
end
Make sure the same harness strap
loops are fitted completely on both
sides of the splitter plate.
If you cannot achieve a snug har-
ness fit for your child, see pages
15-18. To learn how to check har-
ness tightness, see pages 52-54.
sewn
end
70
Coutures
l'extrémi
sewn
end
Advertisement
Table of Contents
