Table of Contents
Advertisement
67
4
5
6
7
8
1
2
3
Slide Harness Straps into
Slots in Pad and Attach Fas-
teners
Starting at Top of Seat, Slip
Pad on Shell
Push Harness Holders
Through Slots in Pad
Wrap Around Bottom and
1
Sides of Shell
2
Pull harness adjustment strap
3
through slot in pad.
Attach Fasteners
Installing Harness System
1
Fully Recline the Child
Restraint
Pull out on recline handle and
push top of child restraint back.
2
Insert Buckle's Metal Retainer
into Slot Closest to Child
Buckle must face out.
1
Rear-Facing
2
the 1st or 2nd buckle slots.
3
Forward-Facing
can be used.
3
Reach Under Seat Between
Base and Shell and Through
Recline Handle
Pull metal retainer completely
through pad and shell.
4
Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle must not pull out.
68
1
2
3
Mode: You must use
Mode: Any slot
continued on next page
Advertisement
Table of Contents
