Safety 1st Grow and Go ARB Manual page 12

17
8
9
10
11
Coutures à
l'extrémité
From Back of Seat,
Remove Harness Strap
Loops From Splitter Plate
Pull Harness Straps Out of
Upper Shoulder Harness
Slots
Pull Body Pillow (Style 2)
Forward Away from Seat
Thread harness straps through slots
in body pillow (style 2).
You must use the body pillow (style
1 or 2).
Thread Harness Straps
Through Lower Shoulder
Harness Slots For Smaller
Infants in Seat Pad and Shell
Coutures à
12
From Back of Seat, Pull
Harness Straps Through
Shell
Harness straps must be in shoulder
harness slots below the metal bar
as shown.
Do not twist harness straps.
13
Attach 2nd Harness Strap
Loops to Splitter Plate As
Shown
Sewn ends of the harness strap loops
must face towards you.
Do not twist harness straps or
harness adjustment strap.
Make sure the same harness strap
loops are fitted completely on both
sides of the splitter plate.
Check your child's fit often.
The harness strap must be returned
to the upper shoulder harness slots
as your child grows.
sewn
end
The harness system must be installed correctly. Do
not use a child restraint with damaged harness straps.
18
sewn
end
Coutures à
l'extrémité