Table of Contents
Advertisement
Harness System Adjustments
15
for Smaller Infants
If you cannot achieve a snug harness fit for your child,
make these adjustments.
When using the lower shoulder harness slots for smaller
children, you MUST use the body pillow and the headrest
MUST be in the lowest position.
1
2
3
With Buckle in the 1st Slot,
Fully Recline the Car Seat
If you need to move the buckle to
the 1st slot, see pages 13-14.
Pull Up Front of Car Seat Pad
From Bottom of Seat, Pull
Metal Retainer Down and
Push It Up into Middle Slot
As Shown
4
From Top of Seat, Lay
the Metal Retainer Flat
Against the Shell As Shown
5
Tuck Car Seat Pad Back
Around Front of Car Seat and
Check Buckle
Pull up on buckle to make sure it is
secured.
The buckle must not pull out.
6
Adjust the Headrest to the
Lowest Position
The headrest must be in the
lowest position.
7
Fully Loosen Harness Straps
Push down on harness release
lever (through opening in pad)
while pulling out on harness
straps as shown.
16
continued on next page
Advertisement
Table of Contents
