Reclining The Car Seat; Installing Anti-Rebound Bar - Safety 1st Grow and Go ARB Manual

Reclining the Car Seat

19
This car seat has 3 positions.
Rear-Facing Mode - 3 Reclined
The level line on shell must be parallel with the ground using
either position 3 or 2.
Forward-Facing Mode - 1 Upright or 2 Semi-Reclined*
Booster Seat Mode - 1 Upright or 2 Semi-Reclined*
* When used in Forward-Facing
semi-reclined position is to be used only to install the child
restraint or booster seat flush against the vehicle seat back.
Vehicle seat back must be upright.
To Recline: Pull out on recline handle
and push top of child restraint back.
For More Upright: Pull out on recline
handle and pull top of child restraint
forward.
1
2
3
or 2 Semi-Reclined
or Booster Seat mode, the

Installing Anti-Rebound Bar

The anti-rebound bar must be used in
The anti-rebound bar must be removed when using
Forward-Facing or
1
Fully Recline Car Seat
2
Place Car Seat Upside Down on
Stable Flat Surface
Line the bottom of the car seat up with
the edge of the surface as shown.
3
Locate Anti-Rebound Bar
Connection Openings in Car
Seat
4
Attach Anti-Rebound Bar
to Car Seat
Firmly push the ends of the anti-
rebound bar into the openings in the
car seat until the bar cannot go any
farther.
Pull up on anti-rebound bar to make
sure it is locked securely in place.
Rear-Facing Mode.
Booster Seat Mode.
20