Table of Contents
Advertisement
Forward-Facing Vehicle Belt
43
+ Tether Install
Before you begin installing the seat
into your vehicle, did you check:
Your child's weight and height?
See page 42.
Your child's fit? See page 11.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
1
1
2
3
2
1
2
3
Remove Anti-Rebound Bar
You must remove the anti-
rebound bar to use this seat in
Forward-Facing
Mode. See
pages 21-22.
Place Car Seat Forward-
Facing in Back Seat
1
2
3
3
Make Car Seat Flush Against
Vehicle Seat
1
2
Put the child restraint into Position 1.
3
Only use the semi-reclined position if
necessary to install the child restraint
flush against the vehicle seat back.
Vehicle seat back must be upright.
NOTE: If your vehicle seat has
a headrest that interferes with
achieving a flush car seat fit,
check your vehicle owner's
manual to see if it can be
removed, adjusted, or if there are
other possible seating locations.
4
Loosely Attach Tether Hook
to Vehicle's Tether Anchor
1
Check vehicle owner's manual
2
for specific location.
3
5
Check if Your Vehicle Belts Will
Work With This Child Restraint
This is very important
because
work with child restraints.
Review pages 25-28 and your
vehicle owner's manual to deter-
mine what kind of vehicle belt you have and how to lock a
child restraint in place.
44
1
2
3
not all vehicle belts will
continued on next page
Advertisement
Table of Contents
