Table of Contents
Advertisement
47
UAS + Tether Install
Do not use the UAS anchors of the child restraint anchorage
system (UAS) to attach this child restraint when restraining
a child weighing more than 18 kg (40 lb).
Before you begin installing the seat
into your vehicle, did you check:
Your child's weight and height?
See page 42.
Your child's fit? See page 11.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
1
2
Forward-Facing
Remove Anti-Rebound
Bar
You must remove the anti-
rebound bar to use this seat
Forward-Facing
in
Mode.
See pages 21-22.
Remove UAS Belt from
Storage Location
Remove it from the rear-facing
belt path so both connectors
or both hooks are on the same
side of the seat.
3
Adjuster
4
Adjuster
5
Route the Connector or
Hook with the Adjuster
Closest to it Through the
Forward-Facing Belt Path
As Shown
Pull it across the seat. Then
thread it through the other
belt path opening.
Do not twist belt.
Finished UAS Belt Routing
Place Car Seat
Forward-Facing in
Back Seat
continued on next page
48
Advertisement
Table of Contents
