NETGEAR 7000 Series Managed Switch Administration Guide
Example #5: (Config) monitor session 1 source interface
Specify the source (mirrored) ports and destination (probe) port.
(Netgear Switch Routing)(Config)#monitor session 1 source?
interface
Configure interface.
(Netgear Switch Routing)(Config)#monitor session 1 source interface?
<slot/port>
(Netgear Switch Routing)(Config)#monitor session 1 source interface 0/7
(Netgear Switch Routing)(Config)#monitor session 1 destination?
interface
Configure interface.
(Netgear Switch Routing)(Config)#monitor session 1 destination interface?
<slot/port>
(Netgear Switch Routing)(Config)#monitor session 1 destination interface 0/8
Example #6: (Interface) port security
(Netgear Switch Routing)(Interface 0/7)#port-security ?
<cr>
Press Enter to execute the command.
mac-address
Add Static MAC address to the interface.
max-dynamic
Set Dynamic Limit for the interface.
max-static
Set Static Limit for the interface.
(Netgear Switch Routing)(Interface 0/7)#port-security max-static ?
<0-20>
Set Static Limit for the interface.
(Netgear Switch Routing)(Interface 0/7)#port-security max-static 5
(Netgear Switch Routing)(Interface 0/7)#port-security max-dynamic 10
15-4
Enter the interface.
Enter the interface.
v1.1, May 2006
Port Mirroring