This section describes the Simple Network Time Protocol (SNTP) feature.
Overview
SNTP:
•
Used for synchronizing network resources
•
Adaptation of NTP
•
Provides synchronized network timestamp
•
Can be used in broadcast or unicast mode
•
SNTP client implemented over UDP which listens on port 123
CLI Examples
The following are examples of the commands used in the SNTP feature.
Example #1: show sntp
(Netgear Switch Routing) #show sntp ?
<cr>
Press Enter to execute the command.
client
Display SNTP Client Information.
server
Display SNTP Server Information.
Simple Network Time Protocol (SNTP)
v1.1, May 2006
Chapter 16
16-1