Config Protocol Vlan Remove; Config Protocol Interface Add; Config Protocol Interface Remove; Show Garp Info - NETGEAR GSM7324 Reference Manual

config protocol vlan remove

This command removes the
this .
<groupid>
Default
Format

config protocol interface add

This command adds the physical
. If
<groupid> <all>
group may have more than one interface associated with it. Each interface and protocol
combination can only be associated with one group. If adding an interface to a group causes any
conflicts with protocols currently associated with the group, this command will fail and the
interface(s) will not be added to the group.
Default
Format

config protocol interface remove

This command removes the
by this . If
<groupid>
Default
Format

show garp info

This command displays Generic Attributes Registration Protocol (GARP) information.
Format
show garp info
Switching Commands
7000 Series L3 Managed Switch Reference Manual for Software v1.0
from this protocol-based VLAN group that is identified by
<vlan>
none
config protocol vlan remove <groupid> <vlan>
<slot.port>
is selected, all physical interfaces will be added to this protocol group. A
none
config protocol interface add <groupid> <slot.port/
all>
from this protocol-based VLAN group that is identified
<interface>
is selected, all ports will be removed from this protocol group.
<all>
none
config protocol interface remove <groupid>
<slot.port/all>
May 30, 2003 Beta Draft
interface to the protocol-based VLAN identified by
7-37