NETGEAR ProSafe GSM7328 Administration Manual page 12

NETGEAR 7000 Series Managed Switch Administration Guide
• Multicast
– IGMP Snooping
• Security
– Denial of Service
– Port Security
• Operating System
– Dual Configuration
• Tools
– Alarm Manager
– Traceroute
– Configuration Scripting
– Advance Keying
– Prelogin Banner
– Port Mirroring
– SNTP
– Syslog
– Data Migration
Audience
Use this guide if you are a(n):
• Experienced system administrator who is responsible for configuring and operating a network
using switch software
• Level 1 and Level 2 Support provider
To obtain the greatest benefit from this guide, you should have an understanding of the switch
software base and should have read the specification for your networking device platform. You
should also have a basic knowledge of Ethernet and networking concepts.
CLI Documentation
The Command Line Reference provides information about the CLI commands used to configure
the switch and the stack. The document provides CLI descriptions, syntax, and default values.
xii
v1.1, May 2006