Example #3: Show Classofservice Ip-Precedence Mapping; Example #4: Configure Cos-Queue Min-Bandwidth And Strict Priority Scheduler Mode - NETGEAR ProSafe GSM7328 Administration Manual

Example #3: show classofservice ip-precedence mapping

(Netgear Switch) #show classofservice ip-precedence-mapping
IP Precedence Traffic Class
------------- -------------
0
1
2
3
4
5
6
7
Example #4: Configure Cos-queue Min-bandwidth and Strict
Priority Scheduler Mode
(Netgear Switch) (Config)#cos-queue min-bandwidth ?
<bw-0>
(Netgear Switch) (Config)#cos-queue min-bandwidth 15
Incorrect input! Use 'cos-queue min-bandwidth <bw-0>..<bw-7>.
(Netgear Switch) (Config)#cos-queue min-bandwidth 15 25 10 5 5 20 10 10
(Netgear Switch) (Config)#cos-queue strict ?
<queue-id>
(Netgear Switch) (Config)#cos-queue strict 1 ?
<cr>
<queue-id>
(Netgear Switch) (Config)#cos-queue strict 1
Class of Service (CoS) Queuing
NETGEAR 7000 Series Managed Switch Administration Guide
1
0
0
1
2
2
3
3
Enter the minimum bandwidth percentage for Queue 0.
Enter a Queue Id from 0 to 7.
Press Enter to execute the command.
Enter an additional Queue Id from 0 to 7.
v1.1, May 2006
8-5