NETGEAR 7000 Series Managed Switch Administration Guide
Table 1-1. Quick Start Commands
Command
copy <tftp://
<ipaddress>/
<filepath>/<file-
name>> sys-
tem:image
clear config
copy system:run-
ning-config
nvram:startup-
config
(or cold boot
reload
the networking device)
1-10
Mode
Privileged
Sets the destination (download) datatype to be an image.
EXEC
The URL must be specified as:
tftp://<ipaddress>/<filepath>/<filename>
The system:image option downloads the code file.
Privileged
Enter yes when the prompt asks if you want to clear all the con-
EXEC
figurations made to the networking device.
Privileged
Enter yes when the prompt asks if you want to save the configu-
EXEC
rations made to the networking device.
Privileged
Enter yes when the prompt asks if you want to reset the system.
EXEC
You can reset the networking device or cold boot the network-
ing device. Both work effectively.
v1.1, May 2006
Description
Getting Started