Report Printing; Operating System Loading - Fluke VT Plus HF Operator's Manual

Report Printing

Reports can be printed from VT for Windows software to any printer installed on a
computer. There are two ways to print from VT for Windows:
Select Print from the File menu to display the system print dialog box. This allows
•
the user to select which printer to use and adjust settings on that printer. Click OK to
send the report to the printer.
Click the Print button on the tool bar. The report is automatically sent to the default
•
system printer. No print dialog displays.
The print header at the top of the reports is stored in the Analyzer. It is loaded into VT for
Windows every time it connects to a Analyzer unit. The print header can be changed
using the Print Header function in the Setup menu.

Operating System Loading

VT for Windows can be used as a utility to load new versions of the Analyzer operating
system software into the flash memory of the Analyzer. Contact the Fluke Biomedical
Service Center for Analyzer software updates.
Using VT for Windows as a utility to load new versions of Analyzer
software overwrites any user settings stored in the Analyzer, but it does not
change the calibration of the Analyzer.
To load new Analyzer operating system software:
1. Select File then Load Flash from the menu. The Analyzer operating software is
stored on two layers: (1) flash (code file) operating code and (2) text.
2. Click the Browse button to point to the file FLASH.hex as the code file and to the
file VP-TEXT.hex as the text file.
3. Click OK to begin downloading.
When communications are established, the Analyzer splash screen displays, and a
Loading Flash dialog appears on VT for Windows with a status bar.
When the download is complete, the Analyzer returns to the default screen. The
download version can be verified by going to the information screen on the Analyzer.
Note
Remote Operation 4

Report Printing

4-27