VT Plus HF
Operators Manual
Ending the Leak Test
To end the Leak test:
1. Either click the STOP button or let the Leak test end by the time running out. When
2. Click the Print button to print a final report for the Leak test.
3. Click the New Test button to start a new Leak test.
Stacked Volume Test Screen
The Stacked Volume test measures tidal volumes over a given number of breaths and
calculates the average tidal volume.
Setting Stacked Volume Test Parameters
The Stacked Volume test setup screen, shown in Figure 4-13, allows the user to enter the
number of breaths to be averaged.
4-18
the Leak test is over a report is prepared showing the final values for the calculated
parameters.
Figure 4-13. Stacked Volume Test: Setup Screen
fec095.bmp