Oxygen Screen - Fluke VT Plus HF Operator's Manual

Oxygen Screen

The Oxygen screen displays the signal and statistics for the oxygen sensor.
The Analyzer measures oxygen in the high-flow port. If oxygen in the low-flow port is to
be measured, the flow of gas must be passed through the high-flow port also to measure
oxygen.
Re-scale
Clear
The user can select the breath parameters displayed on this screen by following the
instructions under Selecting Breath Parameters. Refer to Connection and Setup: Utilities:
Oxygen Sensor Calibration for instructions.
Press the RESCALE soft key to change the scale on the plot of data to a
more appropriate window of values.
RESCALE uses the current min/max values to
determine plot limits.
Press the CLEAR soft key to reset the statistics and re-start the plot.
Note
Operation 3

Oxygen Screen

fec054.bmp
3-17