Main Screens And Tests; Monitor Screen - Fluke VT Plus HF Operator's Manual

Main Screens and Tests

VT for Windows has seven main screens that are accessed through the Screen tabs; these
are listed below:

Monitor screen

•
Single Plot screen
•
Loop Plots screen
•
Full Test screen
•
Trend Test screen
•
Leak Test screen
•
Stacked Volume Test screen
•

Monitor Screen

The Monitor screen, shown in Figure 4-4, allows observation of three of the signals at the
same time.
Each plot can be configured to display any of the signals, (flow, volume, airway pressure,
low pressure, high pressure, and oxygen). Each plot can be independently, set to auto-
scale or manually re-scaled to the user's desired range of values.
On the right hand side of the screen, the statistics for the selected signals are displayed.
These statistics show the min, max, average and current value for the signal that is
currently displayed. For more information on configuring plots, refer to Signal Selection,
Automatic Rescaling, and Manual Re-scaling.
Figure 4-4. Monitor Screen
Remote Operation

Main Screens and Tests

fec086.bmp
4
4-9