Overview Of Vt For Windows Pc Software - Fluke VT Plus HF Operator's Manual

Finally, if the communication port for the Analyzer must be manually set or changed,
start VT for Windows PC software and select Communications > Comm Port from
the pull down menu. Select the appropriate communication port. Communications are
established when the software displays waveforms and the displayed values for flow and
pressure are changing.

Overview of VT for Windows PC Software

VT for Windows PC software provides a simple interface for recording and playing back
data calculated by the Analyzer. The software provides most Analyzer functions on a
simple interface for recording and playing back data calculated by the Analyzer. Figure
4-1 shows the VT for Windows PC software interface, and Table 4-1 identifies its
essential elements.
4
10
Figure 4-1. VT for Windows PC software Interface

Overview of VT for Windows PC Software

9 8 7
Remote Operation 4
1
2
3
5
6
fec086.eps
4-5