Electrical Specifications - GE Vivid 7 Service Manual

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
3-6-2

Electrical Specifications

CONNECTING A Vivid 7 UNIT TO THE WRONG VOLTAGE LEVEL WILL MOST LIKELY
WARNING WARNING
DESTROY THE UNIT.
3-6-2-1 Verification of the System's Voltage Settings
Verify that the mains voltage specified for the unit is available on-site.
The Voltage setting for the unit is found on a label near the Mains Power Circuit Breaker at the rear of
the system, see
Power Rating Label
See also
11
Figure 3-4 on page
Figure 3-4 Mains Circuit Breaker and Power Rating Label
Table 3-10 "Electrical Specifications for Vivid 7" on page
Chapter 3 - System Setup
3-15.
V 7 S
IVID ERVICE
3-16.
M
ANUAL
3 - 15