Chapter 8: Specifications; Electrical Specifications; Environmental Operating Conditions; Storage Requirements - GE BiliSoft Service Manual

NOTE: All specifications are nominal and are subject to change without notice.

Electrical Specifications

Input
Fuses
Leakage Current
Ground impedance

Environmental Operating Conditions

Ambient temperature
Humidity
Atmospheric pressure

Storage Requirements

Temperature
Humidity
Atmospheric pressure
© 2007 by General Electric Company. All rights reserved.

Chapter 8: Specifications

1.5A @ 100 – 240 V~, 50/60 Hz
T3.15A @ 250V~, slo-blo type (qty. 2)
< 300 μA @ 264 V~
< 0.1 ohm from ground pin of the power inlet module
to any exposed metal surface.
+10°C to +35°C (50 to 95°F).
10% to 90% RH non-condensing
70 kPa to 106 kPa
-40°C to +70°C (-40 to 158°F).
0% to 100% RH non-condensing
50 kPa to 106 kPa
M1110150 006
29