①
②
③
④
⑤
Figure 3-6
3.8
Inserting the interface module and the electronics modules
Inserting Modules
Insert the modules in the following order:
• Power Supply PS DC24V
• Interface module
• 2 x 8 DI NAMUR
• 3 x 4 DO DC17.4V/27mA
See also
Installing Terminal Modules for the Interface Module and Electronics Modules (Page 112)
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
3.8 Inserting the interface module and the electronics modules
2 x 8 DI NAMUR
3 x 4 DO DC17.4/27mA
Terminals
LEDs
NAMUR sensor
Wiring of the ET 200iSP modules
Commissioning guideline
47