Installing The Slot Number Labels - Siemens SIMATIC ET 200iSP Operating Instructions Manual

5.6

Installing the Slot Number Labels

Properties
The slot number plates identify the individual electronic modules with a slot (1 to 34).
Requirements
• The terminal modules are installed.
• There must not be any electronic modules inserted when you apply the slot number plates.
• Position terminal module TM-PS-A: One plate at the top left
Position terminal modules TM-IM/EM. TM-EM/EM and TM-RM/RM: One plate at the top left
and right.
Required tools
3.5 mm screwdriver (for removal only).
Installing the slot number plates
1. Break off the slot number plates (1 to 34) from the strip.
2. Use your finger to press the slot number plates into the terminal module.
Figure 5-13
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK
①
Slot number plates
Installing the slot number plates
5.6 Installing the Slot Number Labels
Installing
117