Power Module Interface - Siemens SIMOTION SCOUT D410 Manual

Interfaces

3.10 Power Module Interface

3.10 Power Module Interface
SIMOTION D410 can be connected to a SINAMICS S120 PM340 blocksize power module
via the power module interface.
Note
SIMOTION D410 can only be connected to a SINAMICS S120 PM340 blocksize power
module via the power module interface. A Power Module in chassis format must be
connected via the DRIVE-CLiQ interface (see the section titled Connecting DRIVE-CLiQ
components (Page 67)). A SIMOTION D410 cannot be operated with SINAMICS G120
(PM2x0) Power Modules.
See also
SIMOTION D410 mounted on the power module (Page 56)
54
D410
Manual, 05/2009