Table of Contents
Advertisement
20
Outdoor Fireplace Installations
Travis Industries Inc. gas-fired fireplaces are suitable for installation in outdoor areas protected from
direct water impingement. In addition to maintaining listed mantel and combustibles clearances, a rain
protection overhang factor of 1/2 shall be constructed to the front and to each side of installed
appliances (see the illustration to the right). All wiring connections to line power shall be in accordance
with the outdoor requirements of NECA NFPA 70.
Warnings Regarding Tempered Glass
This fireplace uses tempered glass which is susceptible to thermal shock. Take care to prevent water from
contacting the fireplace, especially if it is hot.
The fireplace may not be used as an indoor-outdoor partition (i.e., The fireplace may not be
placed on an exterior wall)
The fireplace may be installed in an outdoor location. However, it may not be used as an indoor/outdoor
partition (i.e., one side inside, one side outside). This fireplace conveys air through the side openings, making
this type of installation prohibited.
Travis Industries is not responsible for any damage caused by
water, corrosion, oxidation, or rust to the fireplace, its components,
© Travis Industries
Installation (
for qualified installers only)
or any optional accessories (e.g., faces, trim, firebacks, etc.)
1/12/2023 - 1556
PB 36CF ST Install
Advertisement
Table of Contents
