FireplaceXtrordinair ProBuilder 36CF Installation Manual page 13

3. Set the header shield
onto the standoffs with
the 90° bend facing the
middle of the fireplace.
The tips of the standoffs
will protrude through the
heat shield.
4. Attach the heat shield to the standoffs by aligning the
holes on the heat shield tabs with the holes in the
header standoffs and secure using the included
screws.
5. When finished the fireplace should look like the
illustration to the right.
© Travis Industries
Installation
(
for qualified installers only)
1/12/2023 - 1556
13
PB 36CF ST Install