FireplaceXtrordinair ProBuilder 36CF Installation Manual page 57

Finalizing the Installation
Log # 8
Install log #8 as shown below. The hole on the bottom of the narrow, charred end of log #8 rests on the
log locating pin on the right end of log #1. The wider end of log #8 rests on log #2 as shown below.
NOTE: The red line in the lower left picture represents the direction the log should be resting.
Log # 9
Install log #9 as shown below. There is one pin on the bottom of log #9. The pin rests on the top surface
of the center burner. The other end of the log rests on the outer burner. The crook of the log fits around
the center log grate finger. Make sure the log does not obstruct any burner holes.
NOTE: The red line in the lower left picture represents the direction the log should be resting.
© Travis Industries
(
for qualified installers only)
1/12/2023 - 1556
57
PB 36CF ST Install