6.2.4.2
Displaying control/status words
Overview
The control and status words are displayed in the function view in 2 adjacent lists for diagnostic
purposes in the "Control/status words" screen form.
Procedure
To select the group of control and status words, proceed as follows:
1. In one of the 2 drop-down lists, select the required group of control and status words.
The corresponding display and interconnection fields are displayed on the side of the screen
form on which you made the setting in the drop-down list.
An illuminated LED display means that the appropriate bit of the control or status word is set.
2. If you want to display the values of several groups next to one another, set the other desired
groups in the other two drop-down lists
6.2.4.3
Status parameters
The status parameters with the associated numeric values are displayed in the function view in
the "Status parameters" screen form.
Column
Number
Parameter text
Value
Unit
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Meaning of the instruction
Number of the parameter
Complete parameter text in the long form
Numerical value of the parameter
Unit of the parameter
Diagnostics
6.2 Diagnostics via Startdrive
331