Inserting And Specifying Pm240-2 - Siemens SINAMICS S120 Commissioning Manual

7. Confirm the procedure with "Yes".
The Power Module selection list is now refreshed.
8. Select the Power Module based on the Article No.
The data of the selected Power Module is assigned to the Power Module in the device
configuration. The Power Module has therefore been specified.
The corresponding component is shown in the device configuration in dark gray.
5.3.6.3

Inserting and specifying PM240-2

Overview
PM240-2 Power Modules require a Control Unit Adapter (CUA) to establish a connection to a
Control Unit. The following adapter types are available:
• CUA31
• CUA32
Depending on the drive type, when creating a PM240-2, either drive object type "Highly dynamic
(servo)" or "Universal (vector)" is active as default. Many of the following settings depend on the
drive object type that has been set.
Special features
The CUA32 has an integrated encoder evaluation function that can be configured for HTL/TTL or
SSI encoders.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Commissioning
5.3 Creating a project offline
127