Ftpcstart - Ftp Interactive Mode; Ftpverbose - Verbose Mode; Ftp? - Ftp Module - Multitech SocketWireless MT800SWM Reference Manual

#FTPCSTART – FTP Interactive Mode
Description: The module will go into interactive mode. It will ask for all the configuration parameters
first.
Syntax: Set Value: AT#FTPCSTART
Values: FTP Port number:
FTP mode: (0: active, 1: passive)
FTP type: (binary)
Default Value: None
#FTPVERBOSE – Verbose Mode
Description: This command enables or disables server responses.
Syntax: Set Value: AT#FTPVERBOSE=<Value>
View Value: AT#FTPVERBOSE?
Values: 0: Disable
1: Enable
Default: 1: Enable
#FTP? – FTP Module
Description: This command directs the TCP/IP stack to display all AT# parameters for the FTP client
configuration.
Syntax: View Value: AT#FTP?
Values: FTPSERV
FTPPORT
FTPUN
FTPPW
FTPGETFILENAME
FTPFILESIZE
FTPPUTFILENAME
FTPDIR
FTPTYPE
FTPMODE
Default Value: None
Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D)
Chapter 7 – FTP Commands
31