Table of Contents
Advertisement
Chapter 6 – POP3 Commands
#POP3HEADERMODE – POP3 Header
Description:
When receiving an email message, the TCP/IP stack can be configured to send or not to
send the POP3 header over the serial port. The POP3 header contains the From, Cc and
Subject fields.
Syntax:
Set Value: AT#POP3HEADERMODE=<value>
View Value: AT#POP3HEADERMODE?
Values:
0 The email header will not be sent over the serial port while retrieving.
1 The email header will be sent over the serial port while retrieving
Default
Value: Enabled
#POP3PORT – Port of the POP3 Server
Description:
To reach the POP3 server, the TCP/IP stack software must know the port of the POP3
server used for retrieving email.
Note:
This parameter should be changed only by your network administrator since it
depends on network infrastructure configuration including firewalls, proxy or specific TCP
port translation settings.
Syntax:
Set Value: AT#POP3PORT=<value>
View Value: AT#POP3PPORT?
Values:
A number between 0 and 65535. A value of zero is not allowed.
Default
Value: 110
#POP3PW – Password of the POP3 Account
Description:
Password for POP3 account. To retrieve email messages sent to a specified email
address, the TCP/IP stack software must know the POP3 password that has been set for
that email account.
Syntax:
Set Value: AT#POP3PW=<value>
View Value: AT#POP3PW?
Values:
Alphanumeric ASCII text string up to 120 characters. It will take a blank space also.
Default
Value: None
#POP3SERV – Address of the POP3 Server
Description:
To retrieve email messages, the TCP/IP stack software must know the address of the
POP3 server that is to be used. The POP3 server must be the one where the specified
email account is hosted (which is not necessarily maintained by the local ISP).
Syntax:
Set Value: AT#POP3SERV=<value>
View Value: AT#POP3SERV?
Values:
32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx) or
Alphanumeric ASCII text string up to 120 characters if DNS is available. It will take a
blank space also.
Default
Value: None
Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D)
Chapter 6 – POP3 Commands
25
Advertisement
Table of Contents
