Table of Contents
Advertisement
Chapter 3 – WLAN Commands
#WLANSECURITYMODE – Security Mode of WLAN Module
Description:
Sets the Wireless LAN security mode.
Syntax:
Set Value: AT#WLANSECURITYMODE =<value>
View Value: AT#WLANSECURITYMODE?
Values:
0: Security Disable
1: WEP64 Security
2: WEP128 Security
Default
Value: 0: Security Disable
#WEP64KEY – Keys for WEP64 Security Mode
Description:
Sets keys for WEP64 Security mode.
Syntax:
Set Value: AT#WEP64KEYn =<value>, where "n" can be 1 to 4
View Value: AT#NWEP64KEYn?
Values:
ASCII text string of 10 hexadecimal characters
e.g., 1234567890
Default
Value: 6162636465
#WEP128KEY – Keys for WEP128 Security Mode
Description:
Sets keys for WEP64 Security mode.
Syntax:
Set Value: AT#WEP128KEYn =<value>, where "n" can be 1 to 4
View Value: AT#WEP128KEYn?
Values:
ASCII text string of 26 hexadecimal characters
e.g., 12345678901234567890123456
Default
Value: "12345678901234567890123456"
#WEPKEYID – Set the Default TX Key Index
Description:
Sets the default Transmission Key used for data encryption in WEP.
Syntax:
Set Value: AT#WEP128KEY=<value>
Values:
Any value from 1 to 4
Default
Value: 1
#WLANNETWORKMODE – WLAN Network Mode
Description:
Sets Wireless LAN Network mode.
Syntax:
Set Value: AT#WLANNETWORKMODE =<value>
View Value: AT#WLANNETWORKMODE?
Values:
0: Infrastructure mode
1: Ad – Hoc mode
Default
Value: 0: Infrastructure mode
Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D)
Chapter 3 – WLAN Commands
10
Advertisement
Table of Contents
