Table of Contents
Advertisement
#WLANCOUNTRYCODE – Country Code
Description:
Sets country code. Different countries have different restrictions on Wireless LAN
parameters like operating channels and transmit power. To make it operable, the country
code can be set by using this AT command.
Syntax:
Set Value: AT#WLANCOUNTRYCODE =<value>
View Value: AT#WLANCOUNTRYCODE?
Values:
DOMAIN_FCC (For US)
DOMAIN_IC (For Canada)
DOMAIN_ETSI (For Europe)
DOMAIN_SPAIN (For Spain)
DOMAIN_FRANCE (For France)
DOMAIN_MKK (For Japan)
Default
Value: DOMAIN_FCC (For US)
#WLANSCANMODE – Scanning Mode
Description:
Sets scanning mode. The module can work in both active scanning and passive scanning
modes. In active scanning, the module actively sends a probe request to associate with
the AP, and in passive scanning, the module waits for a beacon from the AP and then it
associates.
Syntax:
Set Value: AT#WLANSCANMODE =<value>
View Value: AT#WLANSCANMODE?
Values:
0: Active scanning
1: Passive scanning
Default
Value: 0: Active scanning
#WLANTXPOWER – Maximum Transmit Output Power for
Description:
Sets the maximum transmit output power for WLAN module while communicating.
Syntax:
Set Value: AT# WLANTXPOWER =<value>
View Value: AT# WLANTXPOWER?
Values:
Only integer values. Range is 0 dBm to 16 dBm
Default
Value: 15
#WLANSSID – SSID of WLAN
Description:
Sets the WLAN network SSID.
Syntax:
Set Value: AT#WLANSSID =<value>
View Value: AT#WLANSSID?
Values:
Alphanumeric ASCII Text String of up to 32 characters. It will take a blank space also.
Default
Value: mt800swm
#WLANDATARATE – WLAN Transmission Data Rate
Description:
Sets the WLAN transmission data rate.
Syntax:
Set Value: AT#WLANDATARATE=<value>
View Value: AT#WLANDATARATE?
Values:
1, 2, 5.5, 11 (in Mbps)
Default
Value: 11 (in Mbps)
Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D)
the WLAN Module
Chapter 3 – WLAN Commands
11
Advertisement
Table of Contents
