Table of Contents
Advertisement
Chapter 8 – UART Commands
#UARTBAUDRATE – Set UART Baud Rate
Description:
Sets the UART baud rate.
Syntax:
Set Value: AT#UARTBAUDRATE=<value>
View Value: AT#UARTBAUDRATE?
Values:
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Default
Value: 115200
#UARTDATABITS – Set Number of Data Bits
Description:
Sets the number of data bits.
Syntax:
Set Value: AT#UARTDATABITS=<value>
View Value: AT#UARTDATABITS?
Values:
5, 6, 7, 8
Default
Value: 8
#UARTPARITY – Set Parity Type
Description:
Sets the parity type.
Syntax:
Set Value: AT#UARTPARITY=<value>
View Value: AT#UARTPARITY?
Values:
0 = None
1 = Odd
2 = Even
Default
Value: 0 = None
#UARTSTOPBITS – Set Number of Stop Bits
Description:
Sets the number of stop bits.
Syntax:
Set Value: AT#UARTSTOPBITS=<value>
View Value: AT#UARTSTOPBITS?
Values:
1, 2
Default
Value: 1
#UARTFLOWCONTROL – Set Flow Control Type
Description:
Sets the flow control type.
Syntax:
Set Value: AT#UARTFLOWCONTROL=<value>
View Value: AT#UARTFLOWCONTROL?
Values:
0 = None
1 = Hardware (RTS/CTS)
Default
Value: 0 = None
Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D)
Chapter 8 – UART Commands
32
Advertisement
Table of Contents
