Table of Contents
Advertisement
Chapter 4 - MultiVOIP Software
MultiVOIP 200 Configuration
The MultiVOIP 200 Setup menu consists of 10 buttons, an Events window in the middle of the menu,
and a status bar at the bottom of the menu. The 10 buttons allow you to display and change the
voice channels and IP protocol parameters, display and manage the Phone Book listing, view
statistics and call progress, and change features such as SNMP Agent, Telnet Server, WEB Server,
and assign a MultiVOIP 200 password.
The Events window in the lower third of the Setup menu provides information about the boot process.
The status bar at the bottom of the Setup menu displays the current status of the unit and shows, for
example, if it is Running, the most recent date the unit was configured, the type of connection you
have to the unit, and your rights. It shows if your PC is connected directly to the command port of the
MultiVOIP 200 or is communicating with the Ethernet port. The last field on the status bar is the
Rights field which displays either Read/Write or Read only rights. The first user to communicate with
the MultiVOIP 200 has Read/Write rights that enable the user to view and/or change the configuration
of the MultiVOIP 200. Any additional users have Read Only rights and can only display the
configuration of the MultiVOIP 200 but are prohibited from changing the configuration.
53
Advertisement
Table of Contents
