Table of Contents
Advertisement
Verify that the Communication Type is set for COM Port and the Select Port field is set for the
COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of the
remote MultiVOIP 200.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different from the defaults in the dialog box, refer to your modem user documentation and change
the default values to match your modem.
Click OK when you are satisfied with your selections.
6. Run the MultiVOIP 200 Configuration program. Click Start | Programs | MultiVOIP 200 v2.52 |
MultiVOIP Configuration, or double-click the MultiVOIP Configuration icon in the MultiVOIP
200 program group.
7. The Dialing dialog box is displayed while software is dialing the remote MultiVOIP 200.
8. The Reading Setup dialog box is displayed.
9. The MultiVOIP 200 Setup menu is displayed. This is the dialog box of the remote MultiVOIP 200.
Refer to the online Help provided with your software for a description of each dialog box and field
within a dialog box.
10. After you have changed the configuration of the remote MultiVOIP 200, click Download Setup to
update the configuration. The remote MultiVOIP 200 will be brought down, the new configuration
written to the unit, and the unit will reboot.
11. Click Exit when downloading is complete.
12. The Hangup connection? dialog box is displayed.
Click Yes to disconnect the phone connection to the remote site.
13. If the same telephone number is not going to be used again in the immediate future, you may
want to remove it from the Port Setup dialog box.
Chapter 5 - Remote Configuration and Management
77
Advertisement
Table of Contents
