Table of Contents
Advertisement
21. Click Download Setup to write the new configuration to the Client unit. The Save Setup dialog
box is displayed.
22. Select (check) the Save Current Setup as User Default Configuration and click OK. The Writing
Setup dialog box is displayed as the setup configuration is written to the MultiVOIP 200.
After the setup is written to the MultiVOIP 200, it reboots.
23. Check that the Boot LED on the MultiVOIP 200 is off after the download is complete. This may
take several minutes as the MultiVOIP 200 reboots.
24. You are returned to the Main menu.
Your MultiVOIP 200 is operational at this time.
Repeat the process for each of the Client units. When all Clients have been configured, go
to"Deploying the VOIP Network."
Chapter 3 - Software Loading and Configuration
49
Advertisement
Table of Contents
