Ftp Ipv6 - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Related commands
ftp

ftp ipv6

Use
ftp ipv6
Syntax
ftp ipv6 [ ftp-server [ service-port ] [ vpn-instance vpn-instance-name ]
[ dscp dscp-value | source { ipv6 source-ipv6-address | interface
interface-type
interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
ftp-server
case-insensitive string of 1 to 253 characters. Valid characters for a host name include letters, digits,
hyphens (-), underscores (_), and dots (.).
service-port
default is 21.
dscp dscp-value
the packet transmission priority. The value range is 0 to 63. The default is 0.
source
interface-number }
•
interface interface-type interface-number
number. This option can be used only when the FTP server address is a link local address and
the specified output interface has a link local address. For information about link local
addresses, see Layer 3—IP Services Configuration Guide.
•
ipv6 source-ipv6-address
successfully, make sure this address is the IPv6 address of an interface in up state on the
device.
vpn-instance vpn-instance-name
server belongs. The
characters. If the FTP server belongs to the public network, do not specify this option.
-i interface-type interface-number
This option can be used only when the FTP server address is a link local address and the specified
output interface has a link local address.
: Enables FTP client debugging.
-d
Usage guidelines
This command is only applicable to IPv6 networks.
If no parameters are specified, this command enters the FTP client view.
If the FTP server parameters are specified, you are prompted to enter the username and password
for logging in to the FTP server.
to log in to an IPv6 FTP server and enter FTP client view.
interface-number
: Specifies the IPv6 address or host name of an FTP server. A host name can be a
: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The
: Specifies the DSCP value for IPv6 to use in outgoing FTP packets to indicate
{ ipv6 source-ipv6-address
: Specifies the source address used to establish the FTP connection.
vpn-instance-name
} | -d
|
: Specifies an IPv6 address. To establish the FTP connection
: Specifies the MPLS L3VPN instance to which the FTP
argument is a case-sensitive string of 1 to 31
: Specifies an output interface by its type and number.
103
] * [ -i interface-type
interface interface-type
: Specifies an interface by its type and